Description

CONTACT CUSTOMER SERVICE FOR PRICE AND LEAD TIME. (678) 383-6420

!!! INSURE THE APPLICATION TESTS FOR THE CORRECT VOLTAGE, CYCLE, AND PHASE BEFORE PURCHASING !!!

Three phase applications available as well

36EDD Tube Axial Fan Extruded Aluminum Propeller Direct Drive

EDD36

REPLACEMENT MOTOR SINGLE PHASE 115 VOLT: Please email or call for pricing

REPLACEMENT MOTOR THREE PHASE: Please email or call for pricing

REPLACEMENT BEARINGS: Please email of call for pricing

REPLACEMENT SHAFT: Please call or email for pricing

REPLACEMENT BLADE: Please email or call for pricing

REPLACEMENT TOPCAP/LID: Please email or call for pricing

CONTACT CUSTOMER SERVICE FOR PRICE AND LEAD TIME. (678) 383-6420

EDD

Tube Axial Fan
Extruded Aluminum Propeller
Direct Drive

• EDD utilizes the COOK “E series” extruded aluminum airfoil propeller.
• EDD is a direct drive unit available in 5 sizes from 24 to 48 inches. Performance ranges from 1,800 to 44,000 CFM, with static pressures from 0 to 1 inches.

Description: Fan shall be a tube axial, direct drive, extruded aluminum blade airfoil propeller fan.

Certifications: Fan shall be manufactured at an ISO 9001 certified facility. Fan shall be listed by Underwriters Laboratories (UL 705) and UL listed for Canada (cUL 705).

Construction: Fan shall be of welded and bolted construction utilizing corrosion resistant fasteners. The steel drum shall be constructed of minimum 12 gauge steel with integral flanges on both inlet and outlet. Unit shall bear an engraved aluminum nameplate and shall be shipped in ISTA Certified Transit Tested Packaging.

Coating: All steel fan components shall be Lorenized® with an electrostatically applied, baked polyester powder coating. Each component shall be subject to a five stage environmentally friendly wash system, followed by a minimum 2 mil thick baked powder finish. Paint must exceed 1,000 hours salt spray under ASTM B117 test method.

Propeller: Propeller shall be extruded aluminum airfoil design with cast aluminum hub. The blade pitch shall be factory set and locked using set screws and roll pin. The hub shall be keyed and locked to the shaft utilizing two set screws or a taper lock bushing. Propeller shall be balanced in accordance with AMCA Standard 204-05, Balance Quality and Vibration Levels for Fans.

Motor: Motor shall be NEMA design B with a minimum of class B insulation rated for continuous duty and furnished at the specified voltage, phase and enclosure.