Description

CONTACT CUSTOMER SERVICE FOR PRICE AND LEAD TIME.  

!!! INSURE THE APPLICATION TESTS FOR THE CORRECT VOLTAGE, CYCLE, AND PHASE BEFORE PURCHASING !!!

150 KSPB Filtered Kitchen Supply Packaged Ventilator Side or Bottom Discharge Belt Drive

150KSPB Filtered Kitchen Supply Packaged Ventilator Side or Bottom Discharge Belt Drive

KSPB150 Filtered Kitchen Supply Packaged Ventilator Side or Bottom Discharge Belt Drive

KSPB 150 Filtered Kitchen Supply Packaged Ventilator Side or Bottom Discharge Belt Drive

REPLACEMENT MOTOR SINGLE PHASE 115 VOLT: Please email or call for pricing

REPLACEMENT MOTOR THREE PHASE: Please email or call for pricing

REPLACEMENT BEARINGS: Please email of call for pricing

REPLACEMENT SHAFT: Please call or email for pricing

REPLACEMENT BLADE: Please email or call for pricing

REPLACEMENT TOPCAP/LID: Please email or call for pricing

CONTACT CUSTOMER SERVICE FOR PRICE AND LEAD TIME.  

The KSPB is available in 6 different sizes with wheel diameters ranging from 9” to 20”, with flow rates from 400 CFM to 12,000 CFM and static pressures up to 1.75 inches.

• Impeller Size 9 – 20 in
• Flow: 200 – 14,000 CFM
• SP: 0-3 in

Description:Fan shall be a side intake, roof mounted, belt driven, centrifugal filtered supply fan.

Certifications – Fan shall be manufactured at an ISO 9001 certified facility. Fan shall be listed by Underwriters Laboratories (UL 705) and UL listed for Canada (cUL 705). Fan shall bear the AMCA Certified Ratings Seal for Sound and Air Performance.

Construction – Fan shall be of bolted construction utilizing corrosion resistant fasteners. Housing shall be minimum 18 gauge galvanized steel, bolted to a minimum 16 gauge steel fan base with prepunched mounting holes. Unit shall be provided with an insulated top cover and one inch washable permanent aluminum filter. Internal blower and motor assembly shall be mounted on rubber vibration isolators. Unit shall bear an engraved aluminum nameplate and shall be shipped in ISTA Certified Transit Tested Packaging.

Wheel: Wheel shall be DWDI centrifugal forward curved type, constructed of painted steel. Wheel shall be balanced in accordance with AMCA Standard 204-05, Balance Quality and Vibration Levels for Fans.